KEEPING YOU SAFE AND SECURE

Feel free to reach out. We will respond to you shortly to confirm your appointment.

KEEPING YOU SAFE AND SECURE

Feel free to reach out. We will respond to you shortly to confirm your appointment.

KEEPING YOU SAFE AND SECURE

Feel free to reach out. We will respond to you shortly to confirm your appointment.

Gas Detection

E3Point Sensepoint Pro

The Sensepoint Pro provides comprehensive monitoring of flammable, toxic and oxygen gas hazards in potentially explosive atmospheres, both in and out of doors. Detects flammable gases, oxygen, carbon monoxide, hydrogen sulfide and hydrogen.

This pre-configured detector includes two programmable alarm relays as well as an industry standard 4-20mA output. The scale, range, calibration, relay operation and alarm set points may be adjusted via the transmitters’ backlit LCD and an intrinsically safe remote control. Outputs are automatically inhibited during adjustment thereby reducing the risk of false alarm at the control panel during maintenance.

It is ideal for use with either conduit or steel wire armored cable and glands. A 3/4”NPT entry and M20 adaptor are included as standard. A weatherproof cap is also included for use in the harshest outdoor conditions. Using an easy to replace plug-in sensor, downtime is also reduced and on-going costs are minimized through the use of poison resistant flammable sensors and patented SurecellTM toxic sensor technology.

Click to View Full Technical Specifications

Material: Main body: Powder coated aluminum (ADC12), Sensor: 316 stainless steel, Weatherproof cap: Aluminum, 316 stainless steel mesh
Operating Temperature: Dependent upon gas type and certification
Operating Humidity Range: Continuous: 20-90%RH (non condensing), Intermittent: 10-99%RH (non condensing)
Operating Pressure: 90-110kPa
Storage Conditions: -40°C to +50°C (-40°F to +122°F)
Alarm Relays: 2 x 3A@240Vac alarm relays, link selectable output as NO or NC
Weight: 1450g
Certification: ATEX and UL
Standards: North America: UL1203, Europe: CE, ATEX, EMC (EN50270)
IP Rating: IP65 as standard in accordance with EN60529:1992

Enhanced VESDA ECO - Aspirating Smoke Detection Plus Gas Detection and Environmental Monitoring

Invisible hazards can originate from the release of toxic gases, oxygen deficiency, or the presence of combustible gases/vapors. As with fire detection, proactive gas detection enables countermeasures to be taken to protect personnel and property from such unseen dangers.

VESDA ECO combines aspirating smoke detection with gas detection and environmental monitoring. It uses an existing VESDA pipe network to actively sample air for the presence of smoke as well as hazardous/combustible gases. Integration with other building systems (FACP, PLC, HVAC and BMS) delivers real-time situational awareness and intelligent emergency response, including the activation of demand-controlled ventilation to save energy and control costs.

Gas Detection and Ranges

Each VESDA ECO detector can house up to two gas sensors, and additional detectors can be added easily to the pipe network to monitor more gases if required. The enhanced VESDA ECO can be configured to detect:

lowest flammable limit chart
volume concentration vv
volume concentration ppm
alert alarm hawaii logo
badger fire protection logo
alert alarm hawaii logo
badger fire protection logo